| |
|
| CPU |
- Intel Pentium II Processor 233/266/300/333/455MHz
- Intel Pentium III Processor up to 600MHz
- Intel Celeron processor up to 400MHz
- Intel Celeron PPGA Processor up to 533MHz(Convertor
card with voltage control needed for support)
|
|
|
| Multiplier |
|
| |
|
| Bus Speed |
|
| |
|
| Clock chip |
- IC_Work W196G(28Pin) with IIC Clock Driver
- IC_Work W40S11-23G(28Pin) with IIC SDRAM Buffer
|
| |
|
| Chipset |
- VIA Apollo Pro 133 Chipset
- VT82C693 North Bridge can support 66/100/133MHz
CPU Front Side Bus
- VIA VT82C596B South Bridge supporting:
1.Independent timing of up to 4 drives
2.PIO mode 4 transfers up to 14MB/sec
3.Support ATA 33/66 synchronous DMA mode transfers
up to 66MB/Sec
4. Integrated 16x32bit buffer for IDE PCI Burst Transfers
5.Two USB ports
|
| |
|
| System Memory |
- Three 168pin 3.3V unbuffered 66/100/133MHz DIMM
socket
- Support 8MB to 768MB SDRAM memory
|
| |
|
| BIOS |
- Licensed advanced AWARD BIOS, 2MBit flash Rom,
Plug and Play ready
- Full supports for ACPI specification and OS directed
power management
- Support SpeedEasy, LogoEasy, ManageEasy, BIOS-ProtectEasy
and RecoveryEasy.
|
| |
|
| I/O Feature |
- Winbond W83977 EF I/O chip
- All I/O ports can be Enabled/Disabled by BIOS setup
- One floppy port supports up to two 3.5’’
or 5.25’’ floppy drivers
- Supports LS-120 floppy disk driver and ZIP drive
- Two high speed 16550 fast compatible UARTs(COM1/COM2/COM3/COM4
selectable)
- One enabled parallel port(SPP/EPP/ECP)
- IrDA port support up to 115.2KB/Sec transfer rate
- Support APM&ACPI, P&P 1.0A compatible
|
| |
|
| Bus Type |
- 4 PCI local bus slots
- 3 ISA slots
- 1 AGP slot
|
| |
|
| Advanced Feature |
- Support ManageEasy (Manufacturing option)
- On board LM80 supports system monitoring(monitor
system voltage & temperature, 2 FAN speed and
Chassis instrusion)
- Maxim 1617 monitor cpu temperature (optional)
- Supports both internal and external modem ring
power-on, support WOL
- PS2 keyboard power on (by password)
- Trend ChipAway Virus on guard
- On board switching voltage regulator with VID function
meet VRM8.4 Spec(support 1.3V to 3.5V)
- Provides infrared interface
- Supports auto fan off when system enters suspend
mode
|
| Certificates |
|
| Board Size |
|
| |
|
|
|
