Two
168pin DIMM socket
Support 8MB to 128MB Synchronous DRAM
Two 72pin SIMM sockets
Support 8MB to 64MB capacity
Support standard Fast page mode and EDO RAM
BIOS
AWARD
FLASH BIOS with plug and play ready
Build-in NCR810 and Adaptec 7850 SCSI driver
On
board IDE
Two PCI PIO and Bus
Master IDE ports
Support up to PIO mode 4 and DMA mode 2
I/O Feature
Two
high speed serial ports (16550 Fast UART compatible)
One enhanced parallel port (SPP/EPP/ECP support)
One floppy port supports up to 2 floppy drives (360K/720K/1.2M/1.44M/2.88M)
Support IrDA Infrared and 2 USB (Universal Serial Bus)
Green
Function
Three Green mode support:
Doze, Standby and Suspend
Advanced Feature
All
I/O ports can be enabled / disabled by BIOS setup
Provide protection circuit to prevent damage to the parallel
port
Anti-virus function
Support PS/2 (PS/2 connector not included)
DMI ready
Two regulators on board to support 2.0V ~ 3.5V
Support 75/83 MHz CPU bus speed
Support LS-120 FDD and CD-ROM booting
Support Mixed Type Power Supply (with Standby +5V power supply)
or ATX Power Supply (ATX power converter cable is required)
Support External Modem Ring On, Soft On/Off switch (if ATX
power supply is used)
