Home   |  Support   |   EMS   |   Forum  

About QDI
Award
Innovation
Download
FAQ  
Where to Buy  
Online Forum  
 

System Integration product


ZillioX 6

Drivers
Manual
FAQ
zx6.gif Click to enlarge
Chipset
  • Intel 82443ZX AGPset
  • Intel 82371EB (PIIX4E), Supports :
    1. Independent timing of up to 4 drivers
    2. "Ultra 33" synchronous DMA mode transfers up to 33Mbytes/Sec
Bus Type
  • 2 PCI local bus slots
  • 1 ISA bus slot
CPU
  • Intel Pentium II process up to 450MHz
  • Intel Pentium III Processor up to 550MHz
  • Intel Celeron Processor up to 400MHz
  • Intel Celeron PPGA Processor up to 533MHz(Convertor card with voltage control needed for support)
  • Supports Slot I on-board 1.5V and 2.5V regulator. CPU power supply 1.3V to 3.5V adjustable with VID function
System Memory
  • Two 168pin 3.3V DIMM sockets support up to  256MB SDRAM memory (Register SDRAM up to 512MB)
BIOS
  • Licensed advanced Award BIOS supports Flash ROM BIOS, Plug and Play ready.
  • Full supports for ACPI specification and OS directed power management
  • Speedeasy or Jumper setting for frequency selection(manufacturing option)
On board IDE
  • Supports 2 PCI Master IDE ports
  • Supports up to PIO mode 4 Timing
  • Supports 2 Fast IDE interfaces for up to 4 IDE devices,
  • support "Ultra DMA/33" synchroncus DMA Mode transfers up to 33MB/sec.
Bus Speed
  • 66/100MHz
On board audio
  • Based on the Creative CT2511 16bit sound chip. Compatible with Sound Blaster, Sound Blaster Pro and Windows Sound System Integrated CQM Stereo enhancement support Provides on-board line-in, microphone-in, speaker-out, line-out and MIDI/Joystick socket. Full MPC, MPCII and MPCIII compatible.
On board AGP
  • ATI RAGE IIC(or Rage Pro) AGP graphics controller
  • Integraded 3D, 2D and video acclerators with palette DAC and quadruple clock synthesizer 2MB or 4MB SGRAM display memory on board and a SO-DIMM for extention
  • Use 8MB SGRAM maximum
  • Support a maximum resolution of 1600x1200 at 75Hz(Depending on the memory configuration)
I/O Feature
  • Winbond W83977 EF I/O chip.
  • All I/O ports can be enabled/disabled by BIOS setup
  • 1 Floppy port supports up to two 3.5" or 5.25" floppy drivers (360K/720K/1.2M/1.44M/2.88M)
  • Supports LS-120 floppy disk driver and ZIP drive
  • 2 High speed 16550 fast compatible UARTs (COM1/COM2/COM3/COM4 selectable) with 16-byte send/receive FIFOs and supports MIDI mode
  • 1 Enabled parallel port (SPP/EPP/ECP) at I/O address 378H/278H/3BCH with additional bi-direction I/O capability and multi-mode (SPP/EPP/ECP) (IEEE1248 compliant)
  • Provides protection circuit to prevent damage to parallel port when a connected printer is powered up or operated at higher voltage
Green Function
  • supports ACPI specification and OS Directed Power Management.
  • Supports three green modes : Doze, Standby and Suspend
  • Green LED will blink when the system is in green status
Advanced Feature
  • On-board WB83782D support system monitoring (monitors system voltage, system temperature & temperature of CPU, chassis intrusion and FAN speed)
  • Supports keyboard password power-on.
  • Support LDCM (optional).
  • Supports both internal and external modem ring power-on
  • Supports wakeup on LAN.
  • On-board switching voltage regulator with VID (supports 1.3V to 3.5V).
  • Provides Anti-Virus function in BIOS and driver.
  • Provides infrared interface.
  • Supports auto fan off when system enters suspend mode.
  • Supports power failure resume function
Certificates
  • NSTL Year 2000 Compliant
Board Size
  • 244mm x 210mm (MircoATX)
 
Copyright QDI 2002 -2004