| |
|
| Chipset |
- Intel 82443BX AGP Set supports 100MHz SDRAM
- Intel 82371EB (PIIX4E), Supports :
1. Independent timing of up to 4 drivers
2. PIO mode 4 transfers up to 14Mbytes/sec
3. Supports "Ultra 33" synchronous DMA mode
transfers up to 33Mbytes/sec
4. Integrated 16x32bit buffer for IDE burst transfers
|
|
|
| Bus Type |
- 3 PCI local bus slots, 1 ISA bus slot, 1 AGP slot
(speed 66/100MHz)
|
| |
|
| CPU |
- All of Intel Pentium® II Processor
- Intel Pentium® III Processor
- Intel Celeron™ Processor up to 500MHz
|
| |
|
| System Memory |
- Three 168pin 3.3V unbuffered 100MHz DIMM socket
- Supports up to 384MB SDRAM memory or 768MB register
memory
- 100MHz/66MHz synchronous DRAM (66MHz EDO DRAM)
- SDRAM 64 bit data interface with ECC support
- 4/16/64/128Mbit DRAM device
|
| |
|
| BIOS |
- AWARD Flash BIOS with Plug and Play ready
- Build-in NCR 53C810 SCSI BIOS
- Full support for ACPI specification and OS Directed
Power Management
- Supports IDE CD-ROM or SCSI bootup
|
| |
|
| On board IDE |
- Supports 2 PCI PIO and Bus Master IDE ports for
up to 4 IDE devices including IDE hard disks and CD
ROMs
- Supports up to Mode 4 Timing
- Supports "Ultra DMA/33" synchronous DMA
Mode transfers up to 33Mbytes/sec
- Integrated 16x32bit buffer for IDE PCI Burst Transfers
|
| |
|
| On board audio |
- Creative Vibra 16XV CT2511 sound chip
- Compatible with Sound Blaster, Sound Blaster Pro
and Windows Sound System Integrated CQM
- Stereo enhancement support
- Provides on-board line-in, microphone-in, speaker-out/line-out
and MIDI/Joystick socket
|
| |
|
| I/O Feature |
- Winbond W83977 EF-AW I/O chip
- All I/O ports can be enabled/disabled by BIOS setup
- 1 Floppy port supports up to two 3.5" or 5.25"
floppy drivers (360K/720K/1.2M/1.44M/2.88M)
- Supports LS-120 floppy disk driver and ZIP drive
- 2 High speed 16550 fast compatible UARTs (COM1/COM2/COM3/COM4
selectable) with 16-byte send/receive FIFOs and support
MIDI mode
- 1 Enabled parallel port (SPP/EPP/ECP) at I/O address
378H/278H/3BCH with additional bi-direction I/O capability
and multi-mode (SPP/EPP/ECP) (IEEE1248 compliant)
- Provides protection circuit to prevent damage to
parallel port when a connected printer is powered
up or operated at
higher voltage
|
| |
|
| Green Function |
- Full support Advanced Configuration and Power Interface
(ACPI) specification and OS Directed Power Management
- Supports 3 green modes : Doze, Standby and Suspend
|
| |
|
| Advanced Feature |
- On-board WB83782D support system monitoring (monitors
system voltage, system temperature & temperature
of CPU, chassis intrusion and FAN speed) (optional)
- Supports keyboard password power-on, Supports LDCM
and ManageEasy (optional)
- Supports both internal and external modem ring
power-on,
- Supports wakeup on LAN
- On-board PS/2 mouse and PS/2 keyboard socket, 2
USB ports
- On-board switching voltage regulator with VID (supports
1.3V to 3.5V)
- Anti-Virus function
- Supports IrDA infrared
- Supports Windows 95/98's software power-down
- Supports auto fan off when system enters suspend
mode
- Supports power failure resume function
|
| |
|
|
Certificates |
|
| Board Size |
|
| |
|
|
|
