Home   |  Support   |   EMS   |   Forum  

About QDI
Award
Innovation
Download
FAQ  
Where to Buy  
Online Forum  
 

Slot I Processor based Motherboard
ExcellenX series

ExcellenX II
Drivers
Manual
FAQ
ex2.gif (7763 bytes) Click to enlarge
Chipset
  • Intel 82443EX AGPset, supporting 66MHz SDRAM
  • Intel 82371EB(PIIX4E), supporting :
    1. Independent timing of up to 4 devices
    2. PIO mode 4 transfers up to 14 Mbytes/sec
    3. "Ultra 33" Synchronous DMA mode transfers up to 33 Mbytes/sec
    4. Integrated 8 x 32 bit buffer for IDE PCI Burst Transfers
    5. Two USB ports
Bus Type
  • 1 AGP Slot
  • 2 PCI Slots
  • 2 ISA Slots
CPU
  • Intel Pentium II Processors 233/266/300/333MHz
  • Intel Celeron Processors up to 533MHz
    (Convertor card with voltage control needed for support)
System Memory
  • Two 168pin 3.3V unbuffered 66MHz DIMM sockets
  • Maximum memory capacity up to 256MB SDRAM
  • EDO and Synchronous DRAM support
BIOS
  • Plug and Play ready (Award)
  • 1M DIP flash BIOS
  • All I/O ports can be enabled/disabled by BIOS setup
  • Anti-Virus function, non volatilized CMOS backup
  • SpeedEasy or jumper emulation setting (optional)
  • Supports LogoEasy
On board IDE
  • 2 IDE ports
  • Supports Ultra DMA/33 mode
I/O Feature
  • Winbond 83977 TF/EF Super I/O chip
  • 1 floppy disk interface
  • 2 high speed 16550 compatible UARTs with 16-byte send/receive FIFOs
  • 1 printer port (SPP/EPP/ECP)
  • Two USBs (Universal Serial Bus)
  • PS/2 mouse and PS/2 keyboard connectors
  • IrDA infrared port
Green Function
  • Full support of ACPI and Operating System Directed Power Management
  • Supports slow down, suspend to hard disk
Other Features
  • ATX or SFX power supply support
  • CPU power supply 1.4v to 3.5v adjustable with VID function, meets VRM8.2 spec
  • On board 1.5v and 2.5v regulators
  • Wakeup by PS/2 keyboard, PS/2 mouse, IrDA, Modem or LAN (optional)
  • System monitoring includes 3 fan speeds (controllable) and 7 system voltage, chassis intrusion detector, CPU & system temperature sensed by W83781D (optional)
  • Supports LDCM and ManageEasy (optional)
  • On board 3.5v power supply support for PIIX4EB
Board Size
  • 244 x 177mm

 
Copyright QDI 2002 -2004