| Filename |
Description |
Date |
Size |
|
W1_v23slc.zip |
WinneX 1 BIOS version 2.3
for SpeedEasy, LogoEasy and RecoveryEasy.
Bios modified:.
1. Add the function to support RecoveryCD;
2. Update RecoveryEASY to v1.63;
3. Fixed: 100x8 display 800e. |
11/16/2000 |
270336 |
| |
|
|
|
| |
|
|
|
|
W1_v22slc.zip |
WinneX 1 BIOS version 2.2
for SpeedEasy, LogoEasy and RecoveryEasy.
Bios modified:.
1.Add micrrocode 0686h to support intel new CPU;
2.Add support CyrixIII(samuel) CPU;
3.Fix: Samuel CPU post slowly. |
08/02/2000 |
270336 |
| |
|
|
|
|
W1_v21slc.zip |
WinneX 1 BIOS version 2.1
for SpeedEasy, LogoEasy and RecoveryEasy.
Bios modified:.
MIDI IRQ is set to 5 |
06/01/2000 |
266384 |
| |
|
|
|
|
W1_v20slc.zip |
WinneX 1 BIOS version 2.0
for SpeedEasy, LogoEasy and RecoveryEasy.
Bios modified:.
1.Fixed under QME, fan can not stop in S1.
2.Enhenced suspend to RAM function.
3.Add Resume from S3 by USB function in PCB version after
4.0
4.Support SST 49LF004 Firmware Hub.
5.Fixed S3 compatible problems with some CD-ROM |
05/25/2000 |
265903 |
| |
|
|
|
|
W1_v17slc.zip |
WinneX 1 BIOS version 1.7
for SpeedEasy, LogoEasy and RecoveryEasy.
Bios modified:
1.Added Intel new Celeron CPU support.(This function is
only for PCB3.0 or later.)
2..Disabled SpeedEasy Choice if CPU ratio is locked . |
04/29/2000 |
245709 |
| |
|
|
|
|
W1_v16slc.zip |
WinneX 1 BIOS version 1.6
for SpeedEasy, LogoEasy and RecoveryEasy.
Bios modified:
1.Fix over 1000MHz CPU freq show error. |
04/29/2000 |
243158 |
| |
|
|
|
|
W1_v15slc.zip |
WinneX 1 BIOS version 1.5
for SpeedEasy,LogoEasy and RecoveryEasy.
Bios modified:
1.Added QDI LogoEasy support
2.Updated QDI RecoveryEasy to support Large_size HDD
3.Update TCAV to 1.64
4.Set Spectrum option default value to "Enabled" |
01/20/2000 |
288614 |
| |
|
|
|
|
W1_v14sc.zip |
WinneX 1 BIOS version 1.4
for SpeedEasy and RecoverEasy.
(support PCB v1.0 mainboards only)
Bios Modified:
1. Resolved system hang© problem if win98 (APM -->
ACPI) by HCT when no PS/2 mouse installed.
2. Resolved system can’t be waken up by USB mouse/KB
sometimes.
3. Removed "On-chip Video windows size" in Bios
setup.
4. Set CAS Latency default as 3, and deleted suggested
CL message.
5. Resolved Win98SE shutdown© problem if click or
move the PS/2 mouse during shutdown.
6. Resolved wake up fail from S3© problem, when using
82559 netcard or external modem.
7. Raising the Shut down temp and warning temp to 95 degree.
8. Resolved the yellow mark© problem for LPT or IDE
controller under win98SE.
9. Resolved the interrupt© problem, when resume from
S3 under Win98SE with ATA66 HDD. |
12/06/99 |
171724 |
| |
|
|
|
|
W1_v13s.zip |
WinneX 1 BIOS version 1.3
for SpeedEasy.
(support PCB v1.0 mainboards only)
Bios Modified:
1. Changed some default value as followed:
| SDRAM Cycle Time Tras/Trc |
6/8 --> 5/7 |
| SDRAM RAS Precharge Time |
3 --> 2 |
| CAS# Latency |
3 --> 2 |
| RAS# Timing |
slow --> fast |
| RAS# precharge Timing |
slow --> fast |
2. Support RecoverEasy.
3. Added three hot key prompt message.
4. Resolved the disturb screen problem in setup.
|
07/22/99 |
170922 |
| |
|
|
|
|
W1_v12s.zip |
WinneX 1 BIOS version 1.2
for SpeedEasy.
(support PCB v1.0 mainboards only)
Bios Modified:
1. Support 0 MB Video Cache Mainboard.
2. Updated the BIOS kernel. |
07/22/99 |
155368 |
| |
|
|
|
|
W1_v11s.zip |
WinneX 1 BIOS version 1.1
for SpeedEasy.
(support PCB v1.0 mainboards only)
Bios Modified:
Resolved the flash ROM rewriting problem. |
07/22/99 |
153000 |
| |
|
|
|
|
W1_v10s.zip |
WinneX 1 BIOS version 1.0
for SpeedEasy.
(support PCB v1.0 mainboards only) |
07/22/99 |
153003 |
| |
|
|
|
|
|
|
|
