| A |
This company is not responsible for any damages
caused from the result of end-users flashing their logo.
First of all, there are four files needed,
- 256-color bitmap file (its resolution is 640x480
or less, the size of it cannot be too large)
- Cblogo.exe (it exists in CD with the motherboard
or download from website)
- Awdflash.exe (it exists in CD with the motherboard
or download from website)
- xxx.bin (the BIOS file of this motherboard)
Copy these four files into your hard disk. (You could
create a subdirectory, such as logo and etc.)Enter into
Dos mode when reset the system,and come into the subdirectory,
follow the following instruction to fulfill the logo,
- Cblogo xxx.bin xxx.bmp <enter>
- When it completed successfully, input awdflash
xxx.bin<enter>
- Press F1 to reset when the prompt appeared.
Note: type "CBLOGO/?"to
get more detailed information.
|
